GRACO VATENLEEGSYSTEEM 2150

Prijs op aanvraag

Download de Graco Saniforce 2150 manual:

Graco Saniforce 2150 manual


 

Beschrijving

Vatenlossysteem met dubbel membraan met hoge zuivering:

Het SaniForce 2150 Lossysteem van sanitaire vaten is standaard uitgerust met een opblaasbare dichting van de ramplaat en maakt het mogelijk om lege containers snel te vervangen; de verwijderingsgraad bedraagt 99% en de vloeistof wordt niet verdund.

Eigenschappen van de Graco Vatenleegsysteem 2150 serie:
  • Hygiënische flensklemmen voor snelle demontage
  • Sanitaire, gegritstraalde vochtige secties met afwerking van 125 Ra
  • Gebieden in contact met vloeistof zijn allen FDA-conform en voldoen aan CFR Title 21
  • Verkrijgbaar met ingesloten of blootgestelde bedieningsinrichtingen
Meer informatie of een demo?

Wij van HSC Pumps gaan graag met u in gesprek of geven u geheel vrijblijvend een demo. Neem contact met ons op en bespreek de mogelijkheden:

Contact opnemen
Sanitary Drum Unloaders
Maximum Working Fluid Pressure
5:1 Ratio Piston Pumps
28.3 bar, 2.8 MPa
6:1 Ratio Piston Pumps
44.8 bar, 4.5 MPa
12:1 Ratio Piston Pumps
100.0 bar, 10 MPa
Diaphragm Pumps
8.2 bar, 0.8 MPa
Maximum Air Inlet Pressures
Piston Pump Ram Packages
6.9 bar, 0.7 MPa
Diaphragm Pump Ram Packages
8.0 bar, 0.8 MPa
Ram
6.9 bar, 0.7 MPa
6:1 and 12:1 Ratio Piston Pumps
6.9 bar, 0.7 MPa
5:1 Ratio Piston Pumps
5.5 bar, 0.6 MPa
Diaphragm Pumps
8 bar, 0.8 MPa
Air Inlet Size
Enclosed Controls
1/2 npt(f)
Exposed Controls
3/4 npt(f)
Maximum Ram Package Operating Temperature
5:1 Ratio Piston Pump Ram Packages
60°C
All Other Ram Packages
66°C
Maximum/Minimum Drum Sizes
Maximum Drum ID
61 cm
Minimum Drum ID — straight sided
49 cm
Minimum Drum ID — tapered`
48 cm
Maximum Drum Height
104 cm
Wetted Parts
Inflatable Seal
Neoprene
Ram (plate, fittings, gaskets)
300–Series stainless steel, Buna-N, and polypropylene
5:1 Ratio Piston Pumps (see pump manual)
Stainless steel, Buna-N, FKM, PTFE and UHMWPE. Priming piston pumps also have polychloroprene and nylon. Model 24F197 also has silicone.
6:1 Ratio Piston Pumps (see pump manual)
Stainless steel, buna-N, polychloroprene, nitrile, nylon, and UHMWPE. Certain models have PTFE packings.
12:1 Ratio Piston Pumps (see pump manual)
Stainless steel, acetal, nitrile, PTFE, UHMWPE
Diaphragm Pumps (see pump manual)
316 stainless steel, Santoprene, Buna-N, fluoroelastomer, EPDM, weighted CR, weighted polychloroprene, and PTFE
Noise Data
All Models
See your pump manual.
SaniForce 2150 Diaphragm Pumps
Maximum fluid working pressure
8 bar, 0.8 MPa
Air pressure operating range
1.4–8 bar, 0.14–0.8 MPa
Maximum air consumption
5 m³/minute
Air consumption at 70 psi, 50 gpm
2.0 m³/minute
Maximum free-flow delivery
568 lpm
Maximum pump speed
165 cpm
Gallons/liters per cycle*
3.7 l
Maximum suction lift
8.8 m wet, 4.9 m dry
Maximum size pumpable solids
6.3 mm
Noise Data**
Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow
95 dB(A)
Sound power level
102 dB(A)
Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm
84 dB(A)
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings
PTFE
104°C
Santoprene®
82°C
EPDM
135°C
Polychloroprene
93°C
Stainless Steel
121°C
Inlet/Outlet Sizes
Air inlet size
0.5 in npt(f)
Fluid inlet size
2.5 in sanitary flange
Fluid outlet size
2.5 in sanitary flange
Wetted Parts***
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.
Wetted materials on all models
316 stainless steel
Wetted materials depending on model
EPDM, Polychloroprene, PTFE, Santoprene
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15%
Non-wetted external parts
300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket)
Weight
FD2 Models
66.7 kg
FA1 Models
64 kg
Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1.*** The pump user must verify that the construction materials meet their specific application requirements.