GRACO SANIFORCE 1590HS SERIE

Prijs op aanvraag

Download de Graco Saniforce 1590HS manual:

Graco Saniforce 1590HS manual


 

SKU: saniforce-1590-hs Categorieën: , , ,

Beschrijving

Membraanpomp met hoge zuivering

De pompen met hoge zuivering (HS) van Graco zijn ideaal voor toepassingen die gebruikmaken van het ontwerp met snelle assemblage, aangezien ze uiteen kunnen worden gehaald in minder dan vijf minuten. Ze zijn verkrijgbaar in kogel- en flapmodellen, met tri-clamp verbindingen van 1,5 inch, 2 inch, 3 inch en 4 inch.

Eigenschappen van de Graco SaniForce 1590HS serie:
  • Pompen tot 341 l/min. (90 gpm)
  • Eenvoudige reiniging, snelle assemblage, roterend ontwerp
  • Met ons niet-klevend luchtventiel zonder smeermiddel

Wij van HSC Pumps gaan graag met u in gesprek of geven u geheel vrijblijvend een demo. Neem contact met ons op en bespreek de mogelijkheden:

Contact opnemen
SaniForce 1590 HS and 1590 3A Diaphragm Pumps
Maximum fluid working pressure
8 bar, 0.8 MPa
Air pressure operating range
1.4–8 bar, 0.14–0.8 MPa
Maximum air consumption
3.5 m³/minute
Air consumption at 70 psi, 60 gpm
1.4 m³/minute
Maximum free-flow delivery
378 lpm
Maximum pump speed
200 cpm
Gallons/liters per cycle*
2.0 l
Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables)
8.5 m wet, 4.6 m dry
Maximum size pumpable solids
15.9 mm
Air inlet size
0.5 in npt(f)
Noise Data**
Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow
90 dB(A)
Sound power level
103 dB(A)
Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm
85dB(A)
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and o-ring temperature ratings
PTFE
104°C
Santoprene®
82°C
3A Approved EPDM
135°C
Wetted Parts***
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.
Wetted materials on all models
316 stainless steel, 3A Approved EPDM, PTFE
Wetted materials depending on model
3A Approved EPDM, PTFE, Santoprene
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15%
Non-wetted external parts
300 series stainless steel, polyester (labels), LDPE foam (gasket)
Weight
All Models
44 kg
Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1. *** The pump user must verify that the construction materials meet their specific application requirements.