GRACO HUSKY 3300A, A01, A, A1, AC, PT, PT

Prijs op aanvraag

Download de Graco Husky 3300 Membraanpomp manual:

Graco Husky 3300 Membraanpomp manual


 

Beschrijving

Expanded material offering to handle numerous applications
Flow rates up to 300 gpm (1,135 lpm)
Modular stall-resistant air valve design
Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
Heavy-duty construction
Faster change over with spring loaded pilot valves

Husky 3300 Air-Operated Diaphragm Pump
Maximum fluid working pressure
Aluminum or Stainless Steel with Aluminum Center Section
125 psi
Polypropylene or Stainless Steel with Polypropylene Center Section
100 psi
Air pressure operating range**
Aluminum or Stainless Steel with Aluminum Center Section
20-125 psi
Polypropylene or Stainless Steel with Polypropylene Center Section
20-100 psi
Air consumption
All pumps
90 scfm at 70 psi, 100 gpm
Maximum air consumption*
Aluminum or Stainless Steel with Aluminum Center Section
335 scfm
Polypropylene or Stainless Steel with Polypropylene Center Section
275 scfm
Maximum free-flow delivery*
Standard diaphragms
300 gpm at 125 psi
Standard diaphragms
280 gpm at 100 psi
Overmolded diaphragms
270 gpm at 125 psi
Overmolded diaphragms
260 gpm at 100 psi
Maximum Pump Speed*
Standard diaphragms
103 cpm at 125 psi
Standard diaphragms
97 cpm at 100 psi
Overmolded diaphragms
135 cpm at 125 psi
Overmolded diaphragms
130 cpm at 100 psi
Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables)*
Dry
16 ft.
Wet
31 ft.
Recommended cycle rate for continuous duty
35 - 50 cpm
Recommended cycle rate for circulation systems
20 cpm
Maximum size pumpable solids
1/2 in.
Fluid flow per cycle**
Standard diaphragms
2.9 gal
Overmolded diaphragms
2.0 gal
Ambient Temperature
Minimum ambient air temperature for operation and storage. NOTE: Exposure to extreme low temperatures may result in damage to plastic parts
32° F
Noise (dBa)***
Sound Power
99.1 at 50 psi and 50 cpm, 106.1 at 125 psi and full flow
Sound Pressure
91.5 at 50 psi and 50 cpm 98.2 at 125 psi and full flow
Inlet/Outlet Sizes
Fluid inlet - Polypropylene
3 in. ANSI/DIN flange
Fluid inlet - Aluminum
3 in.-8 npt or 3 in.-11 bspt with 3 in. ANSI/DIN flange
Fluid inlet - Stainless Steel
3 in.-8 npt or 3 in.-11 bspt
Air Inlet - all pumps
3/4 in. npt(f)
Wetted parts
All pumps
Materials chosen for seat, ball, and diaphragm options, plus the pump’s material of construction - aluminum, polypropylene, or stainless steel. Aluminum pumps also have carbon-coated steel
Non-wetted external parts
Polypropylene
stainless steel, polypropylene
Aluminum
aluminum, coated carbon steel
Stainless Steel
stainless steel, polypropylene or aluminum (as used in center section
Weight
Polypropylene
200 lb
Aluminum
150 lb
Stainless Steel
255 lb
Notes
* Maximum values with water as media at ambient temperature. Water level is approximately 3 feet above pump
** Startup pressures and displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type.
*** Sound power measured per ISO-9614-2. Sound pressure was tested 3.28 ft (1 m) from equipment.
Santoprene® is a registered trademark of the Monsanto Co.
Loctite® is a registered trademark of the Loctite Corporation

Extra informatie

Pomphuis materiaal

Aluminium

Membranen

Teflon

Ballen / Kleppen

Teflon

Atex

Ja

Capaciteit max.

1135 lpm

Druk max.

8.6 bar

Industrieel

Ja

Sanitair

Nee